DTPro Qualcomm Module v1.00.0.0.00 (Smart) UFS Rev0.8e Pro is the latest 2026 update to the DTPro Qualcomm service platform. This revision adds support for over 150 Xiaomi Qualcomm models without authentication, introduces Snapdragon 685 instant bootloader unlock for six Redmi and POCO models, brings China to Global firmware conversion via Fastboot Flasher, adds QCN read/write and patcher functions, and includes HyperOS diagnostic mode support. The update also improves EDL (Sahara) protocol handling, automatic eMMC/UFS chip detection, Fastboot device identification, and CPU-ID reading. DTPro is an officially paid program — activation and login purchase are required before use. The setup file is available for download via Google Drive.
DTPro Qualcomm Module Features
EDL (Sahara) Functions
- ✅ Firmware Read Support
- ✅ Firmware Write Support
- ✅ FRP Reset
- ✅ Factory Reset
- ✅ Partition Manager
- ✅ Partition Read / Write / Erase
- ✅ Automatic eMMC and UFS Chip Detection
- ✅ Upgraded XML Protocol
- ✅ Skip EDL Auth on Supported Devices (Pre-March 2026 Security)
Xiaomi Functions
- ✅ Permanent Bootloader Unlock (Snapdragon 685 Models)
- ✅ China to Global Firmware Conversion via Fastboot Flasher
- ✅ Skip Auth Support for 150+ Xiaomi Qualcomm Models
- ✅ Improved EDL Authentication Handling
Diagnostic Mode Functions
- ✅ IMEI Repair (Improved)
- ✅ Read QCN
- ✅ Write QCN
- ✅ QCN Patcher
- ✅ Enable Qualcomm Diagnostic Mode (with HyperOS Support)
- ✅ Read Diagnostic Mode Info (with HyperOS Support)
Fastboot Mode Functions
- ✅ Device Identify / Read Info
- ✅ Improved Xiaomi Device Information Reading
- ✅ CPU-ID Detection
- ✅ Bootloader Status Reading
- ✅ SELinux Set Permissive
Supported Devices – Rev0.8e
Snapdragon 685 – Instant Bootloader Unlock
- ✅ Xiaomi Redmi 15 4G (Creek)
- ✅ POCO M7 4G (Creek)
- ✅ Xiaomi Redmi Note 12 4G (Tapas)
- ✅ Xiaomi Redmi Note 12 4G NFC (Topaz)
- ✅ Xiaomi Redmi Note 13 4G (Sapphire)
- ✅ Xiaomi Redmi Note 13 4G NFC (Sapphiren)
Xiaomi Skip Auth 2026 (January 2026 Firmware)
- ✅ Xiaomi Redmi 15 4G (Creek)
- ✅ POCO M7 4G (Creek)
China to Global Converter
- ✅ Xiaomi Redmi Note 14 Pro+ (Amethyst)
- ✅ Xiaomi 15 (Dada)
- ✅ Xiaomi 15 Ultra (Xuanyuan)
- ✅ Xiaomi Redmi 15 4G (Creek)
- ✅ POCO M7 4G (Creek)
- ✅ Xiaomi Redmi 15 5G (Spring)
- ✅ Xiaomi Redmi 15R 5G (Spring)
- ✅ POCO M7 Plus 5G (Spring)
Full list of 150+ Xiaomi Qualcomm models without authentication is available inside the DTPro tool interface.
Screenshots

Changelogs – Rev0.8e
v1.00.0.0.00 Rev0.8e — June 19, 2026
[Enhancement] Optimized Qualcomm EDL (Sahara) Protocol
[New] EDL (Sahara)
- Added firmware Read support
- Added firmware Write support
- Added FRP Reset
- Added Factory Reset
- Added Partition Manager
- Added Partition Read, Write, Erase
- Improved automatic eMMC and UFS chip detection
- Upgraded XML protocol
[New] Xiaomi Support
- Added permanent Bootloader Unlock (Snapdragon 685 models)
- Added China to Global conversion via Fastboot Flasher
- Added Skip EDL Auth for devices with security before March 2026
- Added 150+ Xiaomi Qualcomm models without auth
[New] Snapdragon 685 Instant BL Unlock:
- Redmi 15 4G (Creek), POCO M7 4G (Creek)
- Redmi Note 12 4G (Tapas), Redmi Note 12 4G NFC (Topaz)
- Redmi Note 13 4G (Sapphire), Redmi Note 13 4G NFC (Sapphiren)
[New] Xiaomi Skip Auth 2026 (January 2026 builds):
- Redmi 15 4G (Creek), POCO M7 4G (Creek)
[New] China to Global Converter:
- Redmi Note 14 Pro+ (Amethyst), Xiaomi 15 (Dada), Xiaomi 15 Ultra (Xuanyuan)
- Redmi 15 4G (Creek), POCO M7 4G (Creek)
- Redmi 15 5G (Spring), Redmi 15R 5G (Spring), POCO M7 Plus 5G (Spring)
[Enhancement] EDL Mode
- Improved Xiaomi EDL authentication on supported models
[New] Diagnostic Mode
- Improved IMEI repair function
- Added Read QCN
- Added Write QCN
- Added QCN Patcher
- Added Qualcomm Diagnostic Mode Enable (HyperOS support)
- Added Qualcomm Diagnostic Mode Info (HyperOS support)
[New] Fastboot Mode
- Added Device Identify / Read Info
- Improved Xiaomi device information reading
- Added CPU-ID detection
- Added Bootloader status reading
- Added SELinux Set Permissive
File Information
| Field | Details |
|---|---|
| File Name | DTPro_Qualcomm_Module_v1.00.0.0.00_Rev0.8e.zip |
| Version | v1.00.0.0.00 Rev0.8e (Latest – June 19, 2026) |
| Developer | DTPro Team |
| Module Type | Qualcomm (Smart UFS) |
| Supported OS | Windows 10 / 11 (64-bit) |
| License | Paid – Activation & Login Required |
Download DTPro Qualcomm Module Rev0.8e
⚠️ Important: DTPro is an officially paid program. Activation and login purchase are required before the tool can be used. The download above is the official setup file only.
Requirements
- A Windows PC or Laptop
- Windows 10 or Windows 11 (64-bit recommended)
- Qualcomm USB Drivers (QDLoader 9008) installed on your PC
- Valid DTPro account with active paid activation
- Compatible firehose loader for your specific Qualcomm device
- Disable Antivirus or Windows Defender before running the tool
- Stable USB connection — avoid USB hubs for EDL operations
FAQ
What is DTPro Qualcomm Module?
DTPro Qualcomm Module is a professional Qualcomm service platform covering EDL (Sahara) flashing, FRP reset, factory reset, partition management, IMEI repair via Diag mode, QCN read/write, Xiaomi bootloader unlock, China to Global conversion, and HyperOS diagnostic support.
Is DTPro a free tool?
No. DTPro is an officially paid program. Activation and a paid login are required before it can be used. The setup file is available to download freely, but operations will not work without a valid purchased account.
What is Skip Auth / No Auth support?
Skip Auth means the tool can connect to certain Xiaomi Qualcomm devices in EDL mode without needing an authentication certificate or paid auth server. This works on devices running firmware with security patches before March 2026. Over 150 Xiaomi models are supported in no-auth mode in Rev0.8e.
What is the China to Global conversion feature?
This feature converts Chinese (CN) firmware to Global firmware directly via Fastboot Flasher inside DTPro. It is useful when a device is region-locked to China and needs Global ROM to work properly with international SIM cards. Rev0.8e supports 8 Xiaomi/POCO models for this function.
What is QCN and why is it important?
QCN (Qualcomm Communications Network) is a backup file that stores IMEI, network calibration, and other critical communication data for Qualcomm devices. Reading and backing up QCN before repairs and restoring it afterward preserves IMEI and network data. DTPro Rev0.8e adds Read QCN, Write QCN, and QCN Patcher functions.
Does Rev0.8e support HyperOS devices?
Yes. Rev0.8e adds Qualcomm Diagnostic Mode Enable and Diagnostic Mode Info functions with explicit HyperOS support, making it compatible with newer Xiaomi devices running HyperOS for IMEI and diagnostic operations.
More Tools ⇒