WWR MTK Tool v2.51 Free Download – Scatter File Generator for MediaTek

WWR MTK Tool v2.51 is a free portable Windows utility developed by the Russian developer vvaaavv for working with MediaTek firmware dumps. It serves two core functions — splitting raw ROM dumps created by SP Flash Tool’s Read Back function into individual partition image files, and generating scatter files from those partition images for use with SP Flash Tool. The tool is widely used in the MediaTek repair and ROM community as a direct replacement for MTK Droid Tool, with better support for newer MediaTek chipsets where MTK Droid Tool fails to generate correct scatter files or split dumps properly. WWR MTK requires no account, no credits, and no installation — just extract and run.

WWR MTK Tool Features

  • ✅ Split Full MediaTek ROM Dump into Individual Partition Images
  • ✅ Generate Scatter File from ROM Dump or Partition Image Set
  • ✅ Scatter Files Formatted Directly for SP Flash Tool
  • ✅ Supports Newer MTK Chipsets (Where MTK Droid Tool Fails)
  • ✅ Handles Modern Partition Layouts and Newer Chipset Structures
  • ✅ Free to Use – No Account, No Credits, No Activation Required
  • ✅ Portable Executable – No Installation Needed
  • ✅ Works Alongside SP Flash Tool for Complete MTK Backup & Flash Workflow
  • ✅ Compatible with Windows 7 / 8 / 10 / 11 (32-bit & 64-bit)

Screenshots

WWR MTK Tool v2.51 Free Download

File Information

FieldDetails
Tool NameWWR MTK Tool (Wwr_MTK)
Latest Versionv2.51
File NameWwR_2.51_Eng.7z
File Size32 MB
Developervvaaavv
Supported OSWindows 7 / 8 / 10 / 11 (32-bit & 64-bit)
LicenseFree – No Activation Required
Companion ToolSP Flash Tool (required for ROM dump creation)

Download WWR MTK Tool v2.51

Download v2.51 via MEGA (Latest)

Previous Versions

VersionFile NameFile SizeDownload
v2.40WwR_MTK_2.40_Eng.zip40 MBMEGA
v2.30WwR_MTK_v2.30.zip25 MBMEGA

⚠️ Warning: Always back up your original scatter file before generating a new one. An incorrect scatter file used with SP Flash Tool can write data to wrong partition offsets, resulting in a soft brick or permanently damaged device. Verify that split partition images match your device’s known partition layout before flashing anything back. This tool is intended for experienced MediaTek technicians and ROM developers.

Requirements

ComponentRequirement
OSWindows 7 / 8 / 10 / 11 (32-bit & 64-bit)
RAM1 GB minimum
StorageSufficient free space for ROM dump and split output
InternetOptional (reduces splash timer on v2.40 and above)
Companion ToolSP Flash Tool (for creating the initial ROM dump)
  • No USB drivers required — WWR MTK processes dump files only, it does not connect to devices
  • No antivirus exception needed — the tool is clean and does not trigger false positives

How To Install WWR MTK Tool

  1. Download the WwR_2.51_Eng.7z file from the MEGA link above.
  2. Extract the 7z file using 7-Zip or WinRAR to any folder on your PC.
  3. Open the extracted folder and locate Wwr_MTK.exe.
  4. Right-click Wwr_MTK.exe and select Run as Administrator.
  5. On first launch (v2.40 and above), a Russian-language splash screen appears with a countdown timer — wait for it to finish. With internet: timer completes faster. Without internet: wait the full 120 seconds.
  6. Once the timer completes, the main tool interface opens and is ready to use.

✅ No installation required. WWR MTK is fully portable — run it directly from the extracted folder on any Windows PC.

How To Use WWR MTK Tool v2.51

Step 1 – Create a ROM Dump Using SP Flash Tool (Prerequisite)

Before using WWR MTK, you need a ROM dump from your MediaTek device:

  1. Open SP Flash Tool on your Windows PC.
  2. Load the scatter file for your device (use the original scatter that came with the stock ROM).
  3. Switch to the Read Back tab.
  4. Click Add to add a new read-back entry.
  5. Set the length to cover the full flash storage size of your device (e.g., 0x400000000 for a 16 GB device).
  6. Choose a save path and file name for the dump output.
  7. Click Read Back and connect your powered-off device via USB.
  8. Wait for the full ROM dump to complete — the output is a single large raw dump file.

Step 2 – Split the ROM Dump

  1. Open Wwr_MTK.exe and wait for the splash timer to complete.
  2. In the tool interface, browse to your raw ROM dump file.
  3. Choose an output folder for the split partition images.
  4. Click Split (or the relevant process button).
  5. WWR MTK reads the dump, identifies partition boundaries, and exports each partition as a separate named image file.

Step 3 – Generate a Scatter File

  1. Open Wwr_MTK.exe and navigate to the Scatter Generator function.
  2. Point the tool to the folder containing your split partition images.
  3. Click Generate Scatter.
  4. WWR MTK analyzes the partition offsets and produces a properly formatted scatter file in the output folder.
  5. The generated scatter file is ready for use with SP Flash Tool for flashing operations.

⚠️ Note: The 120-second splash timer in v2.40 and v2.51 is normal and expected behavior from the developer. Simply wait for it to complete — the tool works correctly once it finishes.

FAQ

What is WWR MTK Tool used for?

WWR MTK Tool splits raw MediaTek ROM dumps (created by SP Flash Tool’s Read Back function) into individual partition image files, and generates scatter files from those images for use with SP Flash Tool. It is the go-to free alternative to MTK Droid Tool for newer MediaTek chipsets.

Is WWR MTK Tool completely free?

Yes. The tool is completely free with no account, no credits, and no activation required. All three versions (v2.30, v2.40, v2.51) are available as direct downloads from MEGA.

Why does the tool show a Russian screen with a timer at startup?

The developer vvaaavv is Russian. The splash screen is a normal part of the tool’s startup. Without internet the timer runs for 120 seconds; with internet it completes faster. This is expected behavior — simply wait for the timer to finish.

What is the difference between WWR MTK and MTK Droid Tool?

Both tools split MTK ROM dumps and generate scatter files, but MTK Droid Tool has limited support for newer MediaTek chipsets. WWR MTK was developed to handle newer chipset partition structures that MTK Droid Tool mishandles or does not support.

Do I need SP Flash Tool to use WWR MTK?

Yes — for creating the initial ROM dump. SP Flash Tool’s Read Back function generates the raw dump file that WWR MTK processes. Once you have the dump file, WWR MTK works independently for splitting and scatter file generation.

Which version should I download?

Download v2.51 — it is the latest and most compatible release. Older versions (v2.30 and v2.40) are available if you encounter any compatibility issues with specific older devices.

Can the generated scatter file be used directly with SP Flash Tool?

Yes. Scatter files generated by WWR MTK are formatted for direct use with SP Flash Tool for firmware flashing on MediaTek devices.

Does WWR MTK connect to my phone?

No. WWR MTK only processes dump files on your PC — it does not connect to or communicate with Android devices directly. USB drivers are not required to run this tool.

More Tools ⇒

Leave a Comment