NCK Online UNISOC Tool v1.5 Free Download (Latest Version 2026)

NCK Online UNISOC Tool v1.5 is the latest release of the dedicated Unisoc repair utility from the NCK Team, built specifically for Unisoc (SPD) chipsets across SC and Tiger T-series platforms. It covers the full range of day-to-day GSM repair tasks — reading device info, factory reset, FRP removal, SIM unlock, IMEI repair, security backup/restore, and direct flash read/write — all through Diag Mode communication. Version 1.5 fixes partition info reading, improves the security backup function that was dropping on some models, strengthens FRP reset for newer Android versions, and adds full Diag Mode support for a large list of new Blackview and Oukitel devices. The tool now supports 24 Unisoc chipsets from the SC6530 through the Tiger T760.

NCK Online UNISOC Tool Features

Diag Mode & Device Info

  • ✅ Enter Diag Mode Directly from Tool
  • ✅ Read Complete Phone Information
  • ✅ Read Partition Info (Fixed in v1.5)
  • ✅ Reboot Device to Recovery

Reset & Backup

  • ✅ Factory Reset / Wipe Phone
  • ✅ Safe Format / Low-Level Format
  • ✅ Backup Security NV
  • ✅ Restore NV Backup (Improved Reliability in v1.5)

FRP & SIM Unlock

  • ✅ Remove FRP (Improved for Newer Android in v1.5)
  • ✅ Read SIM Lock Info and Unlock Codes
  • ✅ Remove SIM Lock (Phone Unlock)
  • ✅ Remove Regional Lock
  • ✅ Unlock Phone via Custom UID
  • ✅ Restore SIM Lock NV Backup (Re-lock if Needed)

IMEI & Serial Repair

  • ✅ IMEI 1–4 Repair and Change
  • ✅ BT Address Change
  • ✅ Serial 1–2 Change

Flash Operations

  • ✅ Read Flash
  • ✅ Write Flash
  • ✅ Make Custom Loader from Firmware
  • ✅ Use Custom Loader for Flashing

Supported Unisoc Chipsets

ChipsetSupported
SC6530✅
SC6531✅
SC6531E✅
SC6531EFM✅
SC6631✅
SC7731C✅
SC7731E✅
SC7731G✅
SC9820E✅
SC9832A✅
SC9863A✅
SC9863A_64✅
SC9863A_64 V2✅
SC9863A V2✅
Tiger T310 (UMS312)✅
Tiger T603✅
Tiger T606✅
Tiger T606 V2✅
Tiger T610 (UMS512)✅
Tiger T610 (UMS512) V2✅
Tiger T612 (UMS9230)✅
Tiger T616✅
Tiger T616 V2✅
Tiger T700✅
Tiger T760✅

Newly Added Devices – v1.5

All newly added models support: Read Info, Wipe / Factory Reset, FRP Reset, Security Backup / Restore, Read / Write Flash, Diag Mode Wipe, Diag Mode Read Info, IMEI Repair, and Diag Mode Serial Number Repair.

Blackview – A52 Pro, A85, BV4800 Pro, Oscal C70, Oscal C80, Oscal Tiger 10, Wave 8

Oukitel – C1 Pro, C32, C33, C36, C51, C58, C58 Pro, C59, C60, C62, C62 Pro, C65, C65 Pro, G1, G2, OT11, OT12, RT9, WP23 Plus, WP23 Pro, WP28 E, WP28 S, WP32 Pro

What’s Fixed in v1.5

  • ✅ Fixed bug affecting partition info reading
  • ✅ Improved security backup function — was dropping on some models in earlier versions
  • ✅ Improved FRP reset for newer Android versions
  • ✅ Full Diag Mode support added for new Blackview and Oukitel models

Screenshots

NCK Online UNISOC Tool v1.5 Free Download

File Information

FieldDetails
File NameNCKOnline_Tool_Unisoc_Installer_v1.5.7z
Versionv1.5 (Latest – July 2026)
File Size121 MB
DeveloperNCK Team
Archive PasswordNckTeam
Supported OSWindows 7 / 8 / 10 / 11 (32-bit & 64-bit)
LicenseFree to Download

Download NCK Online UNISOC Tool v1.5

Download via Sync.com – Official

🔑 Archive Password: NckTeam — enter this when extracting the 7z file.

⚠️ Warning: Always confirm your device’s exact chipset and model before running any flash, FRP, or unlock operation. Writing an incorrect loader or firmware to wrong partition offsets can result in a bootloop or hard brick. Do not disconnect the USB cable during any active read or write process.

Requirements

ComponentRequirement
OSWindows 7 / 8 / 10 / 11 (32-bit & 64-bit)
ProcessorIntel / AMD Dual-Core or faster
RAM2 GB minimum (4 GB recommended)
Storage200 MB free space
USB PortUSB 2.0 or USB 3.0
InternetRequired for login and server operations
  • Unisoc (SPD) USB Driver installed on your PC before connecting the device
  • Disable Antivirus or Windows Defender before running — installer may trigger false positive due to Diag Mode and flash communication routines
  • Use on a dedicated repair PC for best stability

How To Install and Use NCK Online UNISOC Tool v1.5

Installation

  1. Download NCKOnline_Tool_Unisoc_Installer_v1.5.7z from the link above.
  2. Extract the 7z file using 7-Zip with the archive password: NckTeam.
  3. Open the extracted folder and locate the setup installer.
  4. Right-click the installer and select Run as Administrator.
  5. Follow the on-screen installation steps to complete setup.
  6. Launch the tool from the installation directory once complete.

Read Phone Info

  1. Open NCK Online UNISOC Tool and connect your device via USB.
  2. Enter Diag Mode on the device.
  3. Click Read Phone Info — device details will appear in the log panel.

FRP Removal

  1. Connect the device and enter Diag Mode.
  2. Select Remove FRP.
  3. Wait for the operation to complete, then reboot the device — FRP lock will be cleared.

Flash Read / Write

  1. Connect the device via USB.
  2. Load or create a custom loader from your firmware file if required.
  3. Select Read Flash or Write Flash and wait for the process to finish without disconnecting the cable.

⚠️ Important: Install the correct Unisoc USB Driver before starting any Diag Mode or flash operation. Without the driver the device will not be detected.

FAQ

What is NCK Online UNISOC Tool?

NCK Online UNISOC Tool is a dedicated Windows repair utility from the NCK Team for Unisoc (SPD) chipset devices. It covers read info, factory reset, FRP removal, SIM unlock, IMEI repair, security backup/restore, and direct flash read/write through Diag Mode communication.

How many chipsets does v1.5 support?

Version 1.5 supports 25 Unisoc chipsets — from the SC6530 through the full Tiger T-series lineup including Tiger T603, T606, T610, T612, T616, T700, and T760.

Which brands are newly supported in v1.5?

Version 1.5 adds full Diag Mode support for 7 Blackview models (including Oscal series) and 23 Oukitel models, covering read info, factory reset, FRP reset, backup/restore, flash read/write, IMEI repair, and serial number repair.

What was fixed in this update?

v1.5 fixes a partition info reading bug, improves the security backup function that was dropping on some models, and strengthens FRP reset reliability on newer Android versions.

What is the archive password?

The 7z archive password is NckTeam — enter it exactly when prompted by 7-Zip during extraction.

Is NCK Online UNISOC Tool free?

Yes, the installer file is free to download. Some server-based operations (such as SIM unlock code reading) may require NCK credits. Flash, FRP, factory reset, and IMEI repair functions are generally available without credits.

Does it need internet to work?

Internet is required for login and server-based operations such as unlock code generation. Basic Diag Mode functions like read info, factory reset, FRP reset, and IMEI repair can work with just a USB connection after initial login.

More Tools ⇒

Leave a Comment