Alcatel 3X 2019 (5048Y) Flash File Firmware (Stock ROM) Free Download

The Alcatel 3X 2019 (5048Y) stock firmware is now available for free download. This device is powered by a MediaTek MT6763 chipset and runs Android 9.0 (Pie). The official firmware version is TCL_5048Y_MT6763_180610_9.0 and the full ROM package comes with Google apps (Gapps) included.

⚠️ Important: Confirm your model number is exactly 5048Y before downloading. This firmware will not work on other Alcatel 3X variants. You can check your model number at:

  • Settings → About Device → Model Number
  • The back of the device or original packaging

Use the latest version of SP Flash Tool to install this firmware and resolve all software issues on your Alcatel 3X 2019. A complete step-by-step installation guide is provided below — completely free.

Table of Contents

What Is Stock Firmware?

A Stock ROM (also called firmware or flash file) is the official operating system pre-installed on your Android device. It is the core software body that controls every essential function of your phone.

If your Alcatel 3X 2019 has become a hard brick — completely unresponsive or dead after a failed flash or improper modification — reinstalling the stock firmware is the most reliable fix. Hard bricks most commonly occur due to interrupted flashing or careless system modifications. Don’t worry; flashing the correct firmware will almost certainly recover your device.

Problems This Firmware Fixes

Flashing the official 5048Y stock ROM resolves a wide range of software issues, including:

  • ✅ Hang on Logo / Bootloop — Fix device stuck at Alcatel logo or restarting endlessly
  • ✅ Dead After Flash — Recover a completely unresponsive device
  • ✅ Dead Recovery — Restore a device with corrupted recovery partition
  • ✅ Factory Data Reset (FRP) Lock — Bypass Google account and FRP protection
  • ✅ Fastboot Mode Stuck — Exit stuck fastboot or download mode
  • ✅ Display Blank / White Screen — Fix screen-related software faults after flash
  • ✅ IMEI / Baseband Unknown — Restore lost IMEI and network identity
  • ✅ Virus & Auto-App Issues — Clean malware and stop unwanted background app installs
  • ✅ General Software Errors — Resolve system crashes and OS-level bugs

Firmware Details

PropertyDetails
Device NameAlcatel 3X 2019
Model Number5048Y
Firmware VersionTCL_5048Y_MT6763_180610_9.0
SoC / ChipsetMediaTek MT6763
Android VersionAndroid 9.0 (Pie)
ROM TypeFull ROM
File SizeUp to 2GB
GappsIncluded ✅
Root AccessNot Included
PasswordNull (No Password)
Flash ToolSP Flash Tool v5.2

Download Firmware

Alcatel 3X 2019 (5048Y) Flash File (Stock ROM) Without Password

Latest Official Full Firmware For Alcatel 5048Y — Free Download

Firmware VersionAndroidDownload
TCL_5048Y_MT6763_180610_9.0Android 9.0 PieGoogle Drive

Requirements Before You Begin

Make sure everything is ready before starting the flash process:

  • ✅ This Stock ROM works only on the Alcatel 3X 2019 (5048Y)
  • ✅ Download MTK VCOM USB Driver and install on your PC
  • ✅ Download SP Flash Tool v5.2 — latest version
  • ✅ Backup your NVRAM before flashing to preserve IMEI data
  • ✅ Full backup of all personal data (photos, contacts, files)
  • ✅ Device battery charged to at least 50%
  • ✅ Good quality USB data cable

📝 Note: This firmware is for repair purposes only. If you need to downgrade, it works on most MediaTek devices but results may vary. A custom MTK DA file may be required if your device has Download Agent Authentication enabled — search getgsmtips.com for the custom DA file for your device.

How to Install Stock ROM on Alcatel 3X 2019 (5048Y)

Follow these steps carefully to flash the firmware using SP Flash Tool:

  1. Download the Alcatel 5048Y firmware ZIP and extract it to a folder on your PC.
  2. Install the MediaTek VCOM USB Driver on your computer.
  3. Download and extract SP Flash Tool v5.2 to a folder on your PC.
  4. Open the SP Flash Tool folder and run flash_tool.exe.
  5. Go to the Download tab, click Scatter-loading, and browse to the extracted firmware folder. Select the Scatter.txt file to load the ROM.
  6. Set the flash mode to Download Only.
  7. Click the Download button in SP Flash Tool.
  8. Power off your Alcatel 3X 2019 completely, then connect it to the PC via USB cable while holding Volume Up + Volume Down. Make sure all drivers are correctly installed — if no VCOM device appears in Device Manager, a test point connection may be required.
  9. The flashing process will start automatically. Wait for it to complete. Do not disconnect the device during flashing.
  10. Once done, a green circle success notification will appear. Unplug the device and power it on — your Alcatel 3X 2019 is fully restored!

Related Firmware & Guides

Looking for more MediaTek firmware downloads and repair tools? Check these pages on GetGsmTips:

More Tools ⇒

Leave a Comment