MTK USB Driver v5.2307 is the latest version of the official MediaTek USB VCOM Driver for Windows. It is an essential utility that creates a communication bridge between your Windows PC and any Android smartphone or tablet powered by a MediaTek (MTK) chipset. Whether you want to flash stock firmware using SP Flash Tool, repair or write IMEI using SN Writer or MAUI Meta, perform ADB debugging, transfer files via MTP, or fix device not recognized errors during the preloader phase — installing this driver is the required first step. Version v5.2307 introduces enhanced digital signatures for improved compatibility with Windows 11 security policies, and features updated library files for better stability when connecting newer Dimensity and Helio series chipsets. It supports all versions of Windows from XP through Windows 11 in both 32-bit and 64-bit architectures.
⚠️ Important Note before you start:
- Always back up your data before flashing stock firmware on your MediaTek device.
- Enable USB Debugging on your device before connecting it for ADB tasks.
- Run the installer as Administrator to avoid permission errors.
- If Windows blocks the driver installation, disable Driver Signature Enforcement temporarily during setup.
What Is MTK USB Driver?
MTK USB Driver is an essential software component that establishes a seamless connection between MediaTek-powered devices — such as smartphones and tablets — and a computer. MediaTek (MTK) is a leading chipset manufacturer widely used in various mobile devices due to its affordability and high performance. However, a proper communication channel is required to interact with these devices at a deeper level, such as for firmware flashing, data transfer, or device debugging, and that’s where the MTK USB Driver comes into play.
The driver is also known as the MediaTek USB VCOM Driver and includes both the MTK USB VCOM and MTK Preloader USB VCOM components — the two ports that appear in Windows Device Manager when a MediaTek device is connected in preloader or BROM (Boot ROM) mode for flashing.
📝 Note: The MTK USB Driver is a Windows-only utility. On Mac or Linux, you can use alternative methods such as SP Flash Tool’s Linux version combined with system udev rules.
MTK USB Driver Features
- ✅ Connects All MediaTek (MTK) Smartphones & Tablets to Windows PC
- ✅ Enables Firmware Flashing via SP Flash Tool
- ✅ Supports IMEI Repair via SN Writer Tool & MAUI Meta
- ✅ Enables ADB (Android Debug Bridge) & Fastboot Commands
- ✅ Supports MTP (Media Transfer Protocol) for File Transfer
- ✅ Supports MTK USB VCOM Driver (Preloader Mode)
- ✅ Supports MTK Preloader USB VCOM (BROM Mode)
- ✅ Works with FRP Unlock & Screen Lock Removal Tools
- ✅ Works Without PC Suite or Any Bloatware
- ✅ Enhanced Digital Signatures for Windows 11 Compatibility
- ✅ Updated Libraries for Dimensity & Helio Series Chipsets
- ✅ Supports 32-bit & 64-bit Windows
- ✅ Auto Installer — Easy One-Click Setup
- ✅ Free to Download and Use
Supported Chipsets & Brands
MTK USB Driver v5.2307 supports all Android devices powered by MediaTek chipsets across all series:
Supported MediaTek Chipset Series
- ✅ MediaTek Dimensity 9000 / 9200 / 9300 / 9400 / 9500 Series (Flagship 5G)
- ✅ MediaTek Dimensity 8000 / 8100 / 8200 / 8300 / 8400 Series (Upper Mid-Range 5G)
- ✅ MediaTek Dimensity 7000 / 7200 / 7300 / 7400 Series (Mid-Range 5G)
- ✅ MediaTek Dimensity 6000 / 6100 / 6300 Series (Budget 5G)
- ✅ MediaTek Helio G Series (G85, G88, G96, G99, G100, G200) — 4G Gaming Chips
- ✅ MediaTek Helio P Series (P22, P35, P65, P70, P90) — 4G Mid-Range
- ✅ MediaTek Helio A Series — 4G Entry-Level
- ✅ MediaTek MT67xx Series — Older MTK Chipsets
Supported Device Brands
- ✅ Xiaomi / Redmi / POCO
- ✅ OPPO / Realme / OnePlus
- ✅ Vivo / iQOO
- ✅ Samsung (MediaTek-powered models)
- ✅ Tecno / Infinix / itel
- ✅ Nokia / HMD
- ✅ Motorola / Lenovo
- ✅ Huawei / Honor (older MTK models)
- ✅ Symphony / Walton / Lava / Micromax
- ✅ Itel / Gionee / BLU
- ✅ All Other MediaTek Android Devices
Supported Windows Versions
- ✅ Windows XP (32-bit & 64-bit)
- ✅ Windows Vista (32-bit & 64-bit)
- ✅ Windows 7 (32-bit & 64-bit)
- ✅ Windows 8 / 8.1 (32-bit & 64-bit)
- ✅ Windows 10 (32-bit & 64-bit)
- ✅ Windows 11 (32-bit & 64-bit)
Driver Information
| Detail | Info |
|---|---|
| Driver Name | MediaTek Driver Auto Installer |
| Version | v5.2307 (Latest) |
| File Name | Mediatek_Driver_Auto_Installer_v5.2307.00.zip |
| File Size | 9 MB |
| Developer | MediaTek Inc. |
| Supported OS | Windows XP / 7 / 8 / 8.1 / 10 / 11 |
| Architecture | 32-bit & 64-bit |
| Driver Type | MTK USB VCOM + Preloader VCOM |
| License | Freeware |
Download MTK USB Driver v5.2307 – All Versions
Latest Version:
MTK USB Driver v5.2307 — MediaFire
MTK USB Driver v5.2307 — Google Drive
Previous Versions:
| Version | Direct Link | Google Drive |
|---|---|---|
| v1.1352.00 | MediaFire | Google Drive |
| v1.1236.00 | MediaFire | Google Drive |
How To Install MTK USB Driver
Method 1: Auto Installer (Recommended)
- Download the MTK USB Driver v5.2307 zip file from the link above.
- Extract the zip file using WinRAR or 7-Zip. You will see the
Mediatek_Driver_Auto_Installer_v5.2307.00.exefile inside. - Right-click the installer and select Run as Administrator.
- Click Next in the setup wizard.
- Click I Accept to agree to the license terms, then click Next.
- Click Install and wait for the installation to complete.
- Click Finish when done.
- Restart your PC to apply the driver changes.
- Connect your MediaTek device via USB cable — Windows should now detect it automatically.
Method 2: Manual Installation via Device Manager
Use this method if the auto installer does not work or if you need to update an existing driver:
- Extract the driver zip file to a folder on your PC.
- Connect your MTK device to the PC via USB in Download Mode (Preloader Mode).
- Open Device Manager (right-click Start → Device Manager).
- Look for an Unknown Device or a device with a yellow warning icon.
- Right-click the unknown device → Update Driver.
- Select Browse my computer for drivers.
- Browse to the extracted driver folder and click Next.
- Windows will install the MTK USB VCOM Driver automatically.
📝 Tip: If Windows displays a driver signature warning, click Install Anyway. The driver is safe and officially from MediaTek Inc. You can also temporarily disable Driver Signature Enforcement by booting Windows in Test Mode if the driver refuses to install.
FAQ
What is MTK USB Driver used for?
The MTK Driver enables communication between the computer and the device, allowing users to perform tasks such as transferring data, flashing firmware, and backing up and restoring data. Situations that require it include transferring data between the device and the computer, freeing up space on the device, installing stock firmware on the device, and writing or flashing the IMEI number on the device. It is also required for using tools like SP Flash Tool and SN Writer Tool.
Is MTK USB Driver free?
Yes. MTK Driver v5.2307 is free, as the MediaTek community officially releases it for MediaTek mobile users.
Does MTK USB Driver work with SP Flash Tool?
Yes, MTK Driver v5.2307 supports SP Flash Tool, a popular flashing tool used to flash firmware, custom recovery, and other software onto Android devices that use MediaTek chipsets. You must install this driver before SP Flash Tool can detect your device.
Does MTK USB Driver work on Windows 11?
Yes. MTK USB Driver v5.2307 is fully compatible with Windows 11 (both 32-bit and 64-bit). It includes enhanced digital signatures specifically for improved compatibility with Windows 11 security policies.
My PC still doesn’t detect my MTK device after installing the driver. What should I do?
Try the following:
- Restart your PC after driver installation and try again.
- Use a different USB port (prefer USB 2.0) or a different cable.
- Enable USB Debugging on your device.
- Try connecting the device while powered off (in preloader/BROM mode).
- Disable Driver Signature Enforcement on Windows and reinstall.
- Try installing an older version like v1.1352.00 if the latest has compatibility issues.
What is MTK Preloader USB VCOM?
The MTK Preloader USB VCOM is a special port that Windows detects when a MediaTek device is connected in its early boot (preloader) stage — before the Android OS loads. This port is required for SP Flash Tool to communicate with the device for firmware flashing. If this port doesn’t appear in Device Manager, it means the MTK USB Driver is not installed correctly.
Can I use MTK USB Driver on Mac or Linux?
No. The MTK USB Driver Auto Installer is a Windows-only utility. On Linux, you can add udev rules to detect MTK devices for SP Flash Tool. On Mac, the driver is not officially supported.
What is the difference between MTK USB VCOM and MTK Preloader USB VCOM?
Both are included in the MTK USB Driver package. MTK USB VCOM is the standard communication driver used when the device is booted into Android. MTK Preloader USB VCOM appears in Device Manager when the device is in preloader/BROM mode (connected while powered off) and is specifically needed for low-level firmware flashing operations via SP Flash Tool.
More Tools & Drivers ⇒