Realme C25s Pattern & FRP Unlock File | Factory Reset via SP Flash Tool

If your Realme C25s (RMX3195 / RMX3197) is locked due to a forgotten PIN, pattern, password, or Google Account (FRP), this guide walks you through removing the lock using a dedicated unlock file and SP Flash Tool. This method works on the MediaTek Helio G85-powered Realme C25s without requiring a paid unlocking box.

⚠️ Important: Confirm your exact model number is RMX3195 or RMX3197 before downloading. Check in Settings → About Device → Model Number or on the label inside the SIM tray.

About the Realme C25s

The Realme C25s features a 6.5-inch display with a 20:9 aspect ratio, powered by an octa-core MediaTek Helio G85 processor with 4GB RAM. It runs Android 11 out of the box and is backed by a large 6000mAh battery with fast charging support — making it a popular budget device in the Realme lineup.

What Is FRP (Factory Reset Protection)?

Factory Reset Protection is a built-in Android security feature that activates automatically when a Google Account is set up on the device. After a factory or hard reset, Android requires the original Google Account credentials before the device can be used again.

If you remember your Google Account login, the easiest fix is simply signing in on the verification screen. If you are genuinely locked out of your own device, the SP Flash Tool method below is the recommended solution.

Download Files

FileDownload
Realme C25s Unlock File (RMX3195 / RMX3197)MediaFire
SP Flash Tool V5.2112Download
LibUSB Win32 DriverDownload
MTK USB DriverDownload
Mediatek Auth Bypass Tool V4Download

File Password: officialroms

Requirements Before You Begin

  • ✅ Windows PC or Laptop
  • ✅ SP Flash Tool V5.2112 — installed on your PC
  • ✅ LibUSB Win32 Driver OR MTK USB Driver — installed on your PC
  • ✅ WinRAR or 7-Zip to extract downloaded files
  • ✅ Good quality USB cable (original or braided recommended)
  • ✅ Device battery charged to at least 40%
  • ✅ This unlock file is only compatible with Realme C25s (RMX3195 / RMX3197)

How to Unlock Pattern & FRP on Realme C25s

Follow these steps carefully:

Step 1 – Download all required files from the table above and extract them to a folder on your PC using WinRAR or 7-Zip.

Step 2 – Install LibUSB Win32 Driver or the MTK USB Driver on your PC, then restart your computer.

Step 3 – Open the Mediatek Auth Bypass Tool, click BYPASS, then power off your device, hold Volume Up + Volume Down, and connect it via USB cable. Wait for the bypass to complete.

Step 4 – Open SP Flash Tool, click Scatter-loading, navigate to the extracted unlock file folder, and select the MT6768_Android_scatter file.

Step 5 – Click Download-Agent and select the MTK_AllInOne_DA file.

Step 6 – Go to Option → Connection, set the correct COM Port and set Baud Rate to 921600.

Step 7 – Open Device Manager on your PC to verify your device’s COM port number is correctly detected.

Step 8 – Go to the Userdata Format tab and click Manual Flash, then enter the following values:

  • Begin Address [HEX]: 0x2b7000000
  • Format Length [HEX]: 0x300000000

Step 9 – Open the Emergency Dialer and dial ***#813# to complete the first step of FRP removal.

Step 10 – Click the Start button in SP Flash Tool and wait for the process to complete. A green success indicator will appear when done.

Step 11 – Your Realme C25s is now fully unlocked and the pattern/FRP lock has been removed!

Related Firmware & Guides

Looking for more Realme firmware downloads and repair tools? Check out these resources on GetGsmTips:

⚠️ Disclaimer: This guide is intended for users recovering access to their own devices. Always back up personal data before proceeding. The author is not responsible for any damage that may occur during the process. Proceed only if you are confident in following the steps correctly.

Leave a Comment