The Huawei Enjoy 20 Pro DVC-TN20 stock firmware is the official operating system package used to repair, restore, or reinstall Android on your device. This firmware build — DVCM-TN20D 10.1.1.172 (C01E108R3P1) running on EMUI 10.1.1 — is the ideal solution if your device is bricked, experiencing lag, stuttering performance, or suffering from software-related issues.
⚠️ Important: Confirm your exact model number is DVC-TN20 before downloading. This firmware will not work on other Huawei Enjoy 20 Pro variants. Check in Settings → About Phone → Model Number or on the label inside the SIM tray.
What Is a Stock ROM and Why Do You Need It?
A Stock ROM (also called firmware or flash file) is the factory-installed operating system that Huawei ships on your device. It controls every core function of your phone at the system level.
If your Huawei Enjoy 20 Pro DVC-TN20 has become a hard brick — completely unresponsive or stuck after a failed flash or improper modification — reinstalling the stock firmware is the most reliable fix. Hard bricks most commonly occur due to interrupted flashing, incompatible firmware, or careless system modifications.
Benefits of Flashing the Stock ROM
Installing the official DVC-TN20 firmware resolves a wide range of software issues, including:
- Network issues — Fix signal loss, SIM not detected, and mobile data problems
- Hang on Logo / Bootloop — Device stuck on boot screen or restarting endlessly
- Dead device recovery — Revive a completely unresponsive phone
- Camera & system errors — Fix app crashes and OS-level bugs
- Unknown Baseband / IMEI issues — Restore network and SIM identity
- Huawei ID lock — Bypass account verification after factory reset
- FRP / Google Account lock — Bypass Factory Reset Protection
- Auto-installing apps — Stop unwanted background app installations
- Virus & malware removal — Clean wipe returns device to safe factory state
- Unroot device — Return to clean, unmodified factory state
Firmware Details
| Property | Details |
|---|---|
| Device Name | Huawei Enjoy 20 Pro |
| Model Number | DVC-TN20 |
| Firmware Version | DVCM-TN20D 10.1.1.172(C01E108R3P1) |
| EMUI Version | EMUI 10.1.1 |
| Flash Method | SD Card (OTA Package) |
| File Password | getgsmtips.com |
Download Firmware
| Device | Firmware Version | Download |
|---|---|---|
| Huawei Enjoy 20 Pro DVC-TN20 | DVCM-TN20D 10.1.1.172 – EMUI 10.1.1 | Google Drive |
Requirements Before You Begin
Make sure everything is ready before starting the flash process:
- ✅ SD Card with a minimum of 16GB storage (formatted as FAT32)
- ✅ Device battery charged to at least 40%
- ✅ A file extraction tool (WinRAR or 7-Zip) to unzip the firmware
- ✅ Full backup of all personal data (photos, contacts, files)
- ✅ This firmware is only compatible with the Huawei Enjoy 20 Pro (DVC-TN20)
How to Flash Stock ROM on Huawei Enjoy 20 Pro DVC-TN20
This firmware is installed via SD card — no PC or flash tool required. Follow these steps carefully:
Step 1 – Download the firmware from the link above and extract it using WinRAR or 7-Zip.
Step 2 – Insert your SD card into a card reader. Create a new folder on the SD card and rename it exactly “dload” (lowercase, no spaces).
Step 3 – Copy the extracted firmware file into the dload folder. Do not rename the firmware file.
Step 4 – Safely eject the SD card from your PC and insert it into your Huawei Enjoy 20 Pro.
Step 5 – Power off the device completely.
Step 6 – Enter firmware update mode by holding Volume Up + Volume Down + Power simultaneously. Keep holding all three buttons until the screen turns on.
Step 7 – The device will automatically detect the firmware package on the SD card and begin installation. Do not remove the SD card or interrupt the process.
Step 8 – The first boot after flashing may take up to 5 minutes — this is completely normal. Be patient and do not force restart the device.
Step 9 – Once booted, perform a Factory Reset to clear any residual data:
- Hold Volume Up + Power simultaneously until the Huawei logo appears
- In the recovery menu, use the Volume buttons to navigate to Wipe Data / Factory Reset
- Press the Power button to confirm
- Wait for the process to complete, then select Restart
Step 10 – Your Huawei Enjoy 20 Pro DVC-TN20 is now fully restored and running the official stock firmware!
Also Read
Related Firmware & Guides
Looking for more Huawei firmware downloads and free repair tools? Check out these resources on GetGsmTips:
- 🔗 Huawei Nova 3i INE-LX2 Flash File | Stock Firmware (Repair ROM)
- 🔗 Huawei Y9 2019 JKM-LX2 FRP Bypass | Downgrade Firmware Guide
- 🔗 Huawei CRO-U00 (Y3 2017) Flash File | MTK Stock ROM
- 🔗 Samsung Galaxy A20 SM-A205F Flash File | Stock Firmware
- 🔗 ColokTool Pro – Free All-in-One Android Repair Tool (Supports Huawei)
- 🔗 KS Tool 4.6 – Free FRP & Flash Tool for Android Devices
- 🔗 DeepSmartTool v0.41 – Free Firmware Flash & Repair Software
- 🔗 iFrpfile All In One Tool – Free iCloud & FRP Bypass
💡 Pro Tip: Bookmark GetGsmTips.com for the latest Huawei, Samsung, Xiaomi firmware downloads, free flash tools, and step-by-step mobile repair guides — updated regularly.