If you are looking for Itel Vision 1 Pro L6502S Flash file then you have come to the right place. Here you will get the file collected from customer care completely free. This smartphone CPU Spreadtrum and firmware format Pac file, you have the latest version SPD flash tool try to Install this file to solve your brick problem today give you here All version free firmware and full installation guide.
What is stock ROM
Stock ROM is a runs your android device operating system a body your device this flash file, Suddenly your itel L6502S is crash with a virus or hanging problem or boot loop, the logo stays the same, auto restart problem then you need to flash file to fix your android device. Hard reset hot working and doesn’t enter recovery or any kind of software issue then you need to must install stock firmware to the repair your smartphone.
Why Need Firmware
The most android device gets hard brick because of the carelessness of its users. Most users try to root their devices to flash them with infected files. As a result, their devices get a hard brick, and then they have to flash files back on their device. But don’t worry, as installing Stock ROM on Itel L6502S is no rocket science. It’s very easy and we will guide you through each step of the process. By following this guide, you can restore or unbrick back to the previous working condition.
Itel Vision 1 Pro L6502S Flash File Download
L6502S Firmware File Dead [Logo & LCD Fix] Without Password
Care Stock Firmware Flash File For Itel L6502S
Itel Vision 1 Pro L6502S Care Tested Free Download Stock Firmware
File Password: getgsmtips.com
Download | Itel Vision 1 Pro L6502S |
Google Drive | L6502S-F3208-10.0-MX-V013-20211105.zip |
Requirements
- This Stock ROM works only with Itel Vision 1 Pro.
- Windows xp/7/10/11 and use the best quality USB Cable.
- Download Latest SPD USB Drivers
- Download Latest SPD Flash Tool
How to install Stock ROM on Itel Vision 1 Pro
- Download Stock ROM and extract it on your PC.
- Always recommended your device data first backup on your pc.
- Install the Latest Version SPD USB Drivers on your PC.
- Download the SPD Flashing Tool above my post and extract it on your computer.
- Open SPD ResearchDownload Tool.
- then Tap on the loaded packet and select your PAC file.
- After loading .pac complete now Connect your device to your computer.
- Then click the start button now Wait for the process completed done.