Itel A23R Flash File (Free Care) Stock Firmware

Itel A23R Flash File

If you need an Itel A23R Flash File then you have come to the right place. This device CPU Spreadtrum and firmware format Pac, you have the latest version SPD flash tool try to Install this file to solve your software problem today give you here All version free firmware and full installation guide.

What is stock ROM

Stock ROM is a runs your android device operating system a body your device this flash file, If you have any hard brick problem after the flash dead your A23R device its most common problem don’t worry just install this firmware on your device definitely solve your all problem, the most device gets hard brick because of the carelessness of some users,

Why Need Firmware

The reasons why your device will flash hang on logo problem hard reset not working, Automatically application error, FRP lock Fix, IMEI null problem, baseband unknown, if you had forgotten password, Auto Apps Run Virus Clean and monkey virus, After the Flash Dead and display problem then you try to install the Itel A23R flash file on your android device.

Itel A23R Firmware Download

Itel A23R Flash File Dead [Logo & Frp Fix] Without Password

Care Stock Firmware Flash File Download For Itel A23R

Itel A23R Tested ROM

File Password: getgsmtips.com

Itel A23RDownload
A23R_081_F1901_260121MegaGoogle Drive

Requirements

  • This Stock ROM works only with A23R.
  • Windows xp/7/10 and use the best quality USB Cable.
  • Download Latest SPD USB Drivers
  • Download Latest SPD Flash Tool – MegapCloud

How to install Stock ROM on Itel A23R

  • Download Stock ROM and extract it on your PC.
  • Always recommended your device data first backup on your pc.
  • Install the Latest Version SPD USB Drivers on your PC.
  • Download the SPD Flashing Tool above my post and extract it on your computer.
  • Open SPD ResearchDownload Tool.
  • then Tap on the loaded packet and select your PAC file.
  • After loading .pac complete now Connect your device to your computer.
  • Then click the start button now Wait for the process completed done.

Leave a Comment