Huawei Y9 Prime 2019 STK-LX3 Firmware Flash File (Stock ROM)

Huawei Y9 Prime 2019 STK-LX3 Firmware

Download the latest Stock ROM For the Huawei Y9 Prime 2019 STK-LX3 Firmware flash file, this firmware is helpful if you have bricked, lag, or shuttering performance, unroot or bypass the FRP lock.

Download and Install Huawei Y9 Prime 2019 Firmware Stock ROM (Flash File) for your Huawei Android Device. Huawei STK-LX3 Firmware Full Need then you have come to the right place. Huawei STK-LX3 Firmware Download try to Install this file to solve your all software and virus problems today give you here full free installation guide.

Stock ROM is running your android device operating system a body your device this Firmware If you have a hard brick problem after the flash dead your Huawei STK-LX3 it’s a most common problem don’t worry just install the firmware on your device definitely solve your problem, the most device gets hard brick because of the carelessness of some users.

Stock Rom Benefits

if you have any kind of software issue problem on your device that needs flash on a Huawei Y9 Prime 2019, Huawei STK-LX3 Firmware Fix Network related issue, fix your Hang On Logo Problem, unroot your device and fix system bug error camera failed, Fix your Baseband and IMEI Issue, Huawei id on your Smart Device, fix you Automatically install the application on your smartphone problem, solve custom binary blocked by FRP lock, Fix your Frp Or Gmail Lock problem and more.

Huawei STK-LX3 Firmware Download

Huawei Y9 Prime 2019 Firmware Flash File (Stock ROM) Without Password

Latest Update Firmware For Huawei STK-LX3

Huawei Y9 Prime 2019 Latest Stock ROM Firmware Flash File Free Download

File Password: getgsmtips.com

DownloadSTK-LX3
Google DriveSTK-LX3 10.0.0.176(C605E2R2P2)_Firmware_EMUI10.0.0_05015WMC

Requirements:

  • This Stock ROM works only Huawei Y9 Prime 2019.
  • Make sure to charge your device more than 40%.
  • You need an Flashing Tools.

How to install Stock ROM on STK-LX3

  • First You need an SD card minimum of 16GB.
  • Now download the Stock firmware for your Device
  • Create a new folder in your SD card and rename it to dload.
  • Unzip the downloaded file and insert an SD card into your device.
  • press volume up + volume down and power button then keep pressing all together.
  • Your phone will detect the package and will start the process automatically.
  • The first boot may take up to 5minutes so be patient.
  • Now you need to Hard reset your Huawei device.
  • Press & Hold Volume Up + Power buttons until you see Huawei Logo.
  • In the Hard reset, Page chooses to wipe data/factory reset using Volume buttons.
  • and tap on the Power button to confirm
  • Wait until the process fully finishes then Restart your Device.
Huawei Y9s STK-L21 Firmware Flash File (Stock ROM)

Leave a Comment