Micromax Q402 Flash File (Care Firmware) Without Password

Micromax Q402 Flash File

If you need a Micromax Q402 firmware flash file then you have come to the right place. This device CPU Spreadtrum and firmware format Pac, you have the latest version SPD flash tool try to Install this file to solve your software problem today give you here All version free firmware and full installation guide.

What is stock ROM

Stock ROM is a runs your android device operating system a body your device this flash file, If you have any hard brick problem after the flash dead your Micromax Q402 device its most common problem don’t worry just install this firmware on your device definitely solve your all problem, the most device gets hard brick because of the carelessness of some users,

Why Need Firmware

The reasons why your device will flash hang on logo problem hard reset not working, Automatically application error, FRP lock Fix, IMEI null problem, baseband unknown, if you had forgotten password, Auto Apps Run Virus Clean and monkey virus, After the Flash Dead and display problem then you try to install the Micromax Q402 flash file on your android device.

Micromax Q402 Firmware Download

Download Micromax Q402 Flash File Dead Fix File Without Password

Care Stock Firmware Download For Micromax Q402

File Password: getgsmtips.com

MMX_Q402_SW_V02_HW_V2.0_20170330MegaGoogle Drive

MMX_Q402_SW_V07_HW_V1.0_20170307MegaGoogle Drive

MMX_Q402_SW_V14_HW_V2.0_20170804MegaGoogle Drive


  • This Stock ROM works only with Hotwav Micromax Q402.
  • Windows xp/7/10 and use the best quality USB Cable.
  • Download Latest SPD USB Drivers
  • Download Latest SPD Flash Tool – MegapCloud

How to install Stock ROM on Micromax Q402

  • Download Stock ROM and extract it on your PC.
  • Always recommended your device data first backup on your pc.
  • Install the Latest Version SPD USB Drivers on your PC.
  • Download the SPD Flashing Tool above my post and extract it on your computer.
  • Open SPD ResearchDownload Tool.
  • then Tap on the loaded packet and select your PAC file.
  • After loading .pac complete now Connect your device to your computer.
  • Then click the start button now Wait for the process completed done.

Leave a Comment