Huawei DCO-LX9 Firmware Unbrick – Huawei ID

Huawei DCO-LX9 Firmware

If you are need to Huawei DCO-LX9 Firmware Flash File then you have come to the right place. Here you will get the file collected from care completely free. This smartphone Snapdragon 8+ Gen 1 4G, 8GB RAM, OLED, Battery 4700mAh, you have the latest version flash tool try to Install this file to solve your brick problem today give you here All version free firmware and full installation guide.

Download and Install Stock ROM for your Huawei Android Device and Huawei Mate 50 Pro Firmware Need then you have come to the right place. Huawei DCO-LX9 Combination Firmware Download try to Install this file to solve your all software and virus problems today give you here full free installation guide.

I advise visiting the official Huawei website or getting in touch with Huawei support directly if you need to download the firmware or stock ROM for your Huawei Mate 50 Pro handset. They’ll be able to point you in the right direction and provide you the files you need for your particular smartphone model.

Firmware Benefits

if you have any kind of software issue problem on your device that needs flash on a Huawei Mate 50 Pro, this Firmware Fix Network related issue, fix your Hang On Logo Problem, unroot your device and fix system bug error camera failed, Fix your Unknown Baseband and IMEI Issue, Huawei id on your Device, fix you Automatically install the application on your smartphone problem, solve custom binary blocked by FRP lock, Fix your Frp Or Gmail Lock problem and more.

Huawei DCO-LX9 Firmware (Flash File) Download

Huawei Mate 50 Pro Firmware Flash File (Stock ROM) Without Password

Update Combination Firmware Download For DCO-LX9

Huawei Mate 50 Pro Firmware Stock ROM Flash File Download Full Free

File Password:

DownloadHuawei Mate 50 Pro DCO-LX9
Download LinkDCO-LX9 hw ru DCO-L29_103.0.0.158(C10E10R2P1)_Product_Combination_
More Huawei Firmware
Huawei Mate 30 Pro LIO-TL00 Firmware Flash File ROM
Huawei Mate 10 Pro BLA-AL00 Firmware (Flash File) Stock ROM


  • This Stock ROM works only Huawei Mate 50 Pro.
  • Make sure to charge your device more than 40%.
  • You need an SD card minimum of 16GB

How to install Stock ROM on Huawei DCO-LX9

  • First You need an SD card minimum of 16GB.
  • Now download the Stock firmware for your Device
  • Create a new folder in your SD card and rename it to dload.
  • Unzip the downloaded file and insert an SD card into your device.
  • press volume up + volume down and power button then keep pressing all together.
  • Your phone will detect the package and will start the process automatically.
  • The first boot may take up to 5minutes so be patient.
  • Now you need to Hard reset your Huawei device.
  • Press & Hold Volume Up + Power buttons until you see Huawei Logo.
  • In the Hard reset, Page chooses to wipe data/factory reset using Volume buttons.
  • and tap on the Power button to confirm
  • Wait until the process fully finishes then Restart your Device.

Leave a Comment