Download CM2 MT2 v2.28 Setup File Latest Version

Download CM2 MT2 v2.28 New update Mobile Repair Tool Dongle SmartPhone Flash and lock remove Xiaomi, Vivo, Oppo, Huawei, on only MediaTek CPU works easily.

Repair IMEI, Unlock SIM Network, and Reset FRP of all MTK Android devices. if you need the latest version and the old version CM2 MT2 v2.28 setup file then you have come to the right place. you need an updated version CM2 MT2 Setup file and try to install the file on your pc and need a full guide to this article for you.

Feature Of CM2 MT2 v2.28

• Changed: Protocol updated for Raphael / Legacy platforms
• NewSOC: MT6877 supported – any security state – SLA, DAA, Plain
• NewSOC: MT6893 supported – any security state – SLA, DAA, Plain
• Changed: FireFly / Infinity DA (Download Agents) updated
• Changed: NVRAM manager has been rebuild from scratch
• all Old and Modern devices for Identify and Repair operations in FlashMode!

Universal DA (Download Agent) was created by Infinity Team to reach a new service level and gives features

FireFly: NewSOC: MT6739
NewSOC: MT6761
NewSOC: MT6763
FireFly: New operations supported:
Repair Security for Generic, Vivo and all other non-signed cases
Read / Write NVRAM
Restore Backup

Current list of supported SoC:
MT6739
MT6761
MT6763
MT6765
MT6768
MT6771

Supported operations:
Identify: Device Info ( Android ), HWInfo with Full eMMC and EOL info
Format FS: Smart Reset, Extra and all other mode are supported
MemoryTool: Allow execute ALL supported MemoryTool functions
BootLoader Unlock: Allow Unlock device Bootloader – WITHOUT touching UserData
Repair Security for Generic, Vivo and all other non-signed cases
Read / Write NVRAM
Restore Backup

Flasher
Changed: UltraFlash engine updated and also any limitations has been removed
Changed: Flash engine updated

Firmware Reader
Changed: New types supported
Internal Database updated
Changed: MT6877 support
Changed: MT6893 support
Fake “Samsung” devices processing fixed

Service
Changed: “SmartReset” updated
“SmartReset Extra” updated
“Identify” operation now show more security info
“Identify” operation now show modem info/version
Changed: New NVRAM engine/tools
! Read device security now works with Legacy (Old/New) and Raphael (Old/New) lines
! Rebuild check/verify procedures for modern devices
! Repair Security now works in flash mode for Raphael line too ( support most UNSIGNED types – Generic, Huawei, Vivo, Nokia etc. )
! Repair security NOT work with vendor-signed devices ( you will get info about device not supported during operation )
! Signed/Generic mode detection improved
Changed: Restore Backup operation has been updated
Changed: NVRAM read and write operations has been updated

CM2 MT2 Download

CM2 MT2 v2.28 allows you to flash the Stock ROM on your Mediatek Unlocking and more also helps you to remove screen lock and FRP lock on your smartphone.

Tools Name: CM2 MT2 v2.28 (Need CM2 Dongle)
You need to Install libsusb and filter MTK_USB Drivers Software

Download	CM2 MT2
Google Drive – GDrive L2 – Mega	CM2 MT2 V2.28 (New Version)

Download MRT Key V3.95 Latest Setup (Full Setup File)

How To Use CM2 MT2

• Download and extract CM2 MT2 setup file on your computer.
• Install Mediatek USB Driver On Your pc.
• Remove MTK Device Lock Open CM2 MT2 and go CPU tap.
• Connect mode and select format then click start button.
• Flashing completed you have seen all is done message.

Other

Changed: Many different general changes and fixes applied

Feature: Feedback – BugReporting/DebugData collection module enabled. Feedback can be enabled/disabled during installation.

! Feedback feature made for fast, automatic reporting to team about new/unsupported devices in different operations without any additional need of actions from user side.

! That will allow bring server-side updates faster and make updates for new and unsupported phones, if need, every day!