If you need an itel Vision 1 Plus L6501 Flash File then you have come to the right place. This device CPU Spreadtrum and firmware format Pac Android 9.0, you have the latest version SPD flash tool try to Install this file to solve your software problem today give you here All version free firmware and full installation guide.
What is stock ROM
Stock ROM is a runs your android device operating system a body your device this flash file, If you have any hard brick problem, after the flash dead your itel Vision 1 Plus L6501 device its most common problem don’t worry just install this firmware on your device definitely solve your all problem, the most device gets hard brick because of the carelessness of some users,
Why Need Firmware
The reasons why your device will flash hang on logo problem hard reset not working, Automatically application error, FRP lock Fix, IMEI null problem, baseband unknown, if you had forgotten password, Auto Apps Run Virus Clean and monkey virus, After the Flash Dead and display problem then you try to install the itel L6501 Flash File on your android device.
itel Vision 1 Plus L6501 Firmware Download
Itel L6501 Flash File Dead [Logo & Frp Fix] Without Password
Care Stock Firmware Flash File Download For Itel L6501
itel Vision 1 Plus Care Firmware Flash File Download Full Free
File Password: getgsmtips.com
| Download | itel Vision 1 Plus (L6501) |
| Google Drive – Mega | [P36 Pro LTE] (L6501-F6311-9.0-OP-V034-20200519 |
Requirements
- This Stock ROM works only with iTel L6501.
- Windows xp/7/10 and use the best quality USB Cable.
- Download Latest SPD USB Drivers
- Download Latest SPD Flash Tool – Mega
How to install Stock ROM on itel Vision 1 Plus
- Download Stock ROM and extract it on your PC.
- Always recommended your device data first backup on your pc.
- Install the Latest Version SPD USB Drivers on your PC.
- Download the SPD Flashing Tool above my post and extract it on your computer.
- Open SPD ResearchDownload Tool.
- then Tap on the loaded packet and select your PAC file.
- After loading .pac complete now Connect your device to your computer.
- Then click the start button now Wait for the process completed done.